ClickCease
A Plus Quality Inc.

What to Look for When Buying an Air Conditioner

What to Look for When Buying an Air Conditioner

There are many factors to consider when choosing a suitable air conditioning unit for your home. Air conditioners range widely as far as cost is concerned, in energy efficiency, and of course, in their capacity to effectively cool your living quarters. 
 
 

Back to all blogs

A Plus Quality Inc.

Client Testimonials


Powered by HomeStars

FAQ

  • What are mini-split advantages?

    Just as the name implies, a “mini-split” system is a “split system” however available in smaller capacities, for single room to whole house conditioning. Mini-split systems may range from as small as 9,000 BTUh per hour, comparable to say, a small window AC unit, for individual room use, up to 4 and 5 ton capacities for “Room By Room” (also known as “Zoning”) and whole house conditioning. With near universal design, mini-splits are “heat pumps” which provide both heating and cooling for a home. Here are key advantages when compared to traditional split systems:

    Efficiency- Mini-splits are highly engineered systems which offer attractive operating efficiencies, in many instances, eligible for utility company rebates.
    Heat Pump- Most mini-split systems are heat pumps, providing year-round comfort.
    Solar friendly- Due to very low power requirements, mini-splits are an ideal complement to “Net Zero Energy” homes, or any home using renewable power.
    Carbon footprint- Mini-splits are 100% electric, with zero operating emissions of any type.
    Zoning- Most mini-split manufacturers offer systems capable of room-by-room “zoning”, to account for peak demands of a room based upon construction type, exposure orientation and usage.
    Variable capacity- Mini-splits are typically DC inverter driven. That is, a variable speed compressor which modulates in proportion to instantaneous demand. Most conventional split systems, by comparison, operate with an ON-OFF strategy. (Would you use an ON-OFF switch as the accelerator in your vehicle?)
    Location, Location, Location!- Mini-split outdoor units are compact; they can be located far away from noise-sensitive areas, such as bedrooms and home offices. Mini-split indoor units have the ability to be installed where conventional systems cannot.
    They’re perfect for additions and remodels where access to current HVAC system is difficult to access.
    Modern mini-split systems are remarkably quiet; in fact, many times their operation is unnoticed by the end user.

  • Most common Boiler Issues

    - Boiler fails to ignite
    - Low pressure
    - Strange Noises
    - Boiler is not responding to the thermostat
    - Cold Radiators
    - Boiler leaking or dripping
    - Boiler cycling very fast
    - Available Hot water but No Heat

  • How do I know what size unit I need?
    If you have any problems with your system, you should contact the contractor who installed the units. All our systems are covered by a 5 year parts, 7 year compressor limited warranty
     
  • What is a heat pump?

    Heat pumps use electricity to move heat from a cool space to a warm space, making the cool space cooler and the warm space warmer. During the heating season, heat pumps move heat from the cool outdoors into your warm house and during the cooling season, heat pumps move heat from your cool house into the warm outdoors. Because they move heat rather than generate heat, heat pumps can provide equivalent space conditioning at as little as one quarter of the cost of operating conventional heating or cooling appliances.

  • What is a mini-split?

    By definition, and simply put, a “Split System” is a heating and air conditioning system which has two main components, the indoor unit and outdoor unit. In short, the indoor unit absorbs heat energy in the cooling mode, and the outdoor unit rejects the very heat absorbed by the indoor unit. And the cycle is repeated until the set temperature is met. Although the indoor and outdoor units are located in physically different, hence “split” locations, they are connected and operate as, one system; continuously circulating refrigerant liquid and vapor by means of interconnecting, dehydrated copper refrigerant lines, commonly referred to as a “Line Set”.

Read all FAQ

Popular blog

Elevate Comfort and Savings: The Advantages of Upgrading Your HVAC System with A-plus Quality
Your HVAC (Heating, Ventilation, and Air Conditioning) system is the heart of your home's comfort and energy efficiency. If you have an older system, it may be time to consider an upgrade to a more energy-efficient model. In this article, we'll...

Read more

Read all blogs

A Plus Quality Inc.
X
Virtual video consultation

connect now